Adding a WMS layer

In the reference manual it says:

"WMS and WFS will deliver data in the coordinate system defined in the configuration of that layer. Redbex will not transform the data delivered by WMS and WFS. It is up to the user to ensure that the data delivered by the WMS is conforming to the coordinate system specified with this setting. If these systems do not match layer will be shown but the location of objects will be wrong."

To configure this, click the cog wheel settings icon on the map (1) and check coordinate system in drop down menu (2). This coordinate system much match the coordinate system (2) in Figure 2, which is defined by clicking WMS settings (1).

Figure 1                                                                                                                                                                   Figure 2

Redbex Knowledge Base